Lubrication Method  It detects chain link in operation, checks the timing, and  sends a signal to the accumulator. Receiving the  pressure from the accumulator, oil gushes from the  distribution valve. Oil is supplied to the chain lubrication  point through the nozzle.
 Oiling Quantity  0.03 or 0.06cm3 per place/time
 Oiling Capacity           Up to 5 places/time. However, differences may occur  according to total piping extension and installation  environment condition, etc.
 Timing Tracking Capability  As a standard, transit time of the link is 0.3 seconds or  more. However, if plural places can be oiled at once, it  can correspond to the speed accordingly.
 Kinematic Viscosity Range of Oil  Used  20 – 300mm2/s
 Piping Capacity          Main pipe (Φ 8×6) = up to 5m.
 Branch pipe (Φ 4×2) = up to 0.5m.
 Control (Control Unit)  Oiling time exclusive type – Oiling time for all links is set   in advance, and oiling will automatically stop after the    predetermined set time elapses.
 Oiling time accumulation type (option) – Only oiling time   is counter accumulated.

« Ѻ˹ҷ

© copyright 2013 - 2020, www.autolub.co.th All Rights Reserved.
     Designed & Developed by Redjasmin.com host7+